AlgaPure seaweed extract msds

Soluble seaweed extract material safety data sheet

Material: soluble Seaweed Extract SDS revision: Jan 2021
SDS reference: ANP.ORG.9.6.EU.1114

1.0 IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND COMPANY
1.1 Product identifier
Ascophyllum nodosum Soluble Seaweed Extract
Form: black powder or flakes
1.2 Relevant identified uses of the substance or mixture and uses advised against
Used as a fertilizer to supplement a well-balanced crop nutrition program.
1.3 Details of the supplier of the safety data sheet
Company name: Shandong Jiejing Group Corp
Address: No 517 Shandong Road Rizhao China
Contact person: Michael Cui
http://www.seaweedextractfertilizer.com
1.4 Emergency telephone number
Tel: +8613734337739 Email: michaelcui1985@hotmail.com

2.0 HAZARDS IDENTIFICATION
2.1 Classification of substance or mixture
The product is not classified as dangerous according to the criteria of the Dangerous Substances Directive (67/548/EEC). The product is not classified as dangerous according to the criteria of the REGULATION (EC) No 1272/2008 on Classification, Labelling and Packaging of Substances and Mixtures.

2.2 Label elements
The product does not require any specific labelling elements to identify hazards.
2.3 Other hazard
The product does not have any other hazards.

3.0 COMPOSITION/INFORMATION ON INGREDIENTS
3.1 Substances
Substance CAS No. EC No. Classification Composition
Ascophyllum nodosum extract 84775-78-0 283-907-6 No classification 100% w/w

4.0 FIRST AID MEASURES
4.1 Description of first aid measures
General: Product is not hazardous. If irritation or discomfort occurs, medical advice should be sought.
Inhalation: Product is not toxic. Vapours should not be intentionally breathed in.
Eye contact: Product is not irritating to eyes. On contact, eyes should be held open and flushed with plenty of water. Should any irritation occur, medical attention should be sought.
Skin contact: Product is not irritating to skin. On contact, skin should be washed with mild soap and water.
Should any discomfort occur, medical attention should be sought.
Ingestion: Product is not toxic if ingested. On ingestion, plenty of water or milk should be drunk. Should any discomfort occur, medical attention should be sought.
4.2 Most important symptoms and effects, both acute and delayed
See 4.1. No information on any delayed effects.
4.3 Indication of any immediate medical attention and special treatment needed
Medical attention should be sought if any irritation or discomfort occurs.

5.0 FIRE FIGHTING MEASURES

5.1 Extinguishing media
Use appropriate media (water, foam, dry powder or CO2) for surrounding the fire. Note: Product can be slippery in liquid form or when in combination with water.
5.2 Special hazards arising from the substance or mixture
No special hazards arising.
5.3 Advice for fire-fighters
Please note, the product can become slippery when in liquid form or when in combination with water.

6.0 ACCIDENTAL RELEASE MEASURES
6.1 Personal precautions, protective equipment and emergency procedures
Gloves and eye protection should be worn when undertaking any clean up due to temporary staining.
6.2 Environmental precautions
No specific precautions are required, as the product is not considered to pose an environmental hazard.
6.3 Methods and material for containment and cleaning up
Spills may be easily cleaned by removing as much solid as possible and washing the spill area using copious amounts of water. Loose product should not be left on the floor in damp areas due to the product becoming slippery when in combination with water.
6.4 Reference to other sections
Refer also to sections 8 and 13.

7.0 HANDLING AND STORAGE
7.1 Precautions for safe handling
Avoid handling, as this may cause staining. Specific personal protective equipment is stated in section 8.
7.2 Consideration for safe storage, including any incompatibilities
Store in a cool place and out of direct sunlight. Do not contaminate water, food or feed by storage or disposal.
7.3 Specific end uses
Refer to subsection 1.2

8.0 EXPOSURE CONTROL / PERSONAL PROTECTION
8.1 Control parameters
Workplace exposure limits: None assigned
DNEL (derived no effect level): Not yet established PNEC (predicted no effect concentration): Not yet established
8.2 Exposure controls
General: Check workplace instructions/procedures and risk assessments for any exposure control and personal protective equipment requirements (eg COSHH assessments). Exposure control measures and personal protective equipment specified in these risk assessments should take precedence over the more general recommendations below because they take into account highly variable factors specific to the workplace and activity concerned which cannot be anticipated in a safety data sheet. Otherwise:
Engineering controls: There are no specific ventilation requirements. Eyewash facilities should be available.
Respiratory protection: No specific requirements.
Eye protection: Eye protection such as safety glasses should be worn when handling due to possible temporary staining.
Skin protection: Chemically resistant gloves, e.g. rubber, neoprene, butyl, PVC or nitrile, should be worn to protect against temporary staining.
Environmental: Refer to section 6.2.
General hygiene: Remove all protective equipment before eating, drinking or smoking, and before entering any ‘clean’ areas. Hands should be washed immediately after any contact with the product. All protective equipment should be cleaned before removal where practical and before re-use – if not possible, they should be disposed of as chemical waste (refer to section 13).

9.0 PHYSICAL AND CHEMICAL PROPERTIES
9.1 Information on basic physical and chemical properties
Appearance Black powder or flakes
Odour Marine-like
pH 7 – 11
Melting point °C Not determined
Initial boiling point °C Not determined
Boiling range °C Not determined
Evaporation rate Not determined
Bulk density g/cm3 0.65
Vapour density air = 1 Not determined
Vapour pressure mm Hg Not determined
Viscosity cp/s N/A
Autoignition temperature °C 550
Decomposition temperature °C Not determined
Flash point °C N/A
Flammability (solid, gas) Not determined
Flammability limits in air % Not determined
Explosivity limits in air % Not determined
Explosive potential Not determined
Oxidising potential Not determined
Solubility in water Fully soluble
Solubility in other g/ml Not determined
Log water/octanol partition coefficient Not determined

9.2 Other information
No data available on fat solubility, conductivity, redox potential, radical formation potential or photocatalytic properties.

10.0 STABILITY AND REACTIVITY
10.1 Reactivity
Product is not reactive under normal circumstances.
10.2 Chemical stability
Product is stable under normal circumstances. Oxidants and acids can cause degradation of the product.
10.3 Possibility of hazardous reactions
Product is not reported to undergo hazardous reactions.
10.4 Conditions to avoid
Oxidants and acids may cause degradation of the product.
10.5 Incompatible materials
Oxidants and acids may cause degradation of the product.
10.6 Hazardous decomposition products
Not applicable.

11.0 TOXICOLOGICAL INFORMATION

11.1 Information on toxicological effects Acute toxicity
Exposure route Effects
Inhalation No effect
Skin No effect
Ingestion Non-toxic. Significant ingestion may cause nausea and discomfort.

Specific target organ effects (single and repeated exposure)
Exposure route Effects
Inhalation No effect
Skin No effect
Ingestion No effect
General No effect

CMR (carcinogenicity, mutagenicity, reproductive toxicity)
Exposure route Effects
Carcinogenicity No effect
Mutagenicity No effect
Reproductive toxicity No effect

Corrosivity and irritancy
Exposure route Effects
Inhalation No effect
Eyes No effect
Skin Very slight erythema with no other signs of irritation
Ingestion No effect

12.0 ECOTOXICOLOGICAL INFORMATION
12.1 Toxicity
Non-toxic to marine algae, vertebrates or invertebrates.
12.2 Persistence and degradability
Product is fully biodegradable.
12.3 Bioaccumulation potential
Due to its biodegradability, the product presents minimal bioaccumulation potential, and therefore minimal environmental impact.
12.4 Mobility in soil
No data.
12.5 Results of PBT and vPvB assessment
Product exhibits no PBT or vPvB properties.
12.6 Other adverse effects
No additional adverse effects.

13.0 DISPOSAL CONSIDERATIONS
13.1 Waste treatment methods
Handling: Product is not hazardous – please refer to sections 7 and 8 for further details on hazardous waste.
Material: The material is non-hazardous, and should be disposed of in accordance to local, regional or national regulations
Packaging: Contaminated packaging must be disposed of in accordance to local, regional or national regulations.
Regulations: Relevant local, regional and national regulations should be complied with.

14.0 TRANSPORT INFORMATION
The product is non-hazardous. Therefore, no specific precautions are necessary.
14.1 UN number Not available
14.2 UN proper shipping name Not available
14.3 Transport hazard class(es) Not applicable
14.4 Packing group Not applicable
14.5 Environmental hazards Unclassified
14.6 Special precautions for user No special precautions required
14.7 Transport in bulk according to Annex II of MARPOL 73/78 and the IBC Code
No specific information required

15.0 REGULATORY INFORMATION
15.1 Safety, health and environmental regulations/ legislation specific for the substance or mixture
The product is not subject to any workplace risks.
15.2 Chemical safety assessment
A chemical safety assessment has not yet been carried out for this product.

16.0 OTHER INFORMATION
Abbreviations used in this SDS:
67/548 EEC: The Dangerous Substances Directive
CLP: Classification, Labelling and Packaging Regulation
UN: United Nations Model Regulations on the Transport of Dangerous Goods